Mailsales@sparkdoorhardware.com
Phone+86-571-5626 1828
enLanguage
Home / Products / Sliding Wooden Door Hardware / Carbon Steel Barn Door Hardware

Carbon Steel Barn Door Hardware

Why Choose Us

Company Strength

Hangzhou Spark Hardware was established in 2008, located in Hangzhou city of eastern China, closely near Shanghai. Today we are enjoying the position of a credible and successful supplier and business partner. We have the best R&D department in the sector of sliding door hardware and the number of our loyal customers is rising constantly.

Rich Experience

We specialize in designing, manufacturing, and exporting of high-quality sliding door hardware, door lever handle and shower accessories for over 15 years. Our main products include outdoor barn door hardware、pocket door frame、sliding wooden door hardware、sliding glass door hardware, etc.

Stringent Quality Control

We are leaders in the design, manufacturing, and marketing of high-quality sliding door hardware over 10 years. Our own lab. can do Salt spray testing, thickness testing, loading testing and life testing for every batch of products, to make sure it is safety and reliable.

Customer Service

We are always committed to providing customers with the best quality products and services, and customer satisfaction is our ultimate goal.All of our products are covered by a limited 3-years warranty.

 

What Is Carbon Steel Barn Door Hardware

 

 

Carbon steel barn door hardware refers to the track, hangers, and other components used to hang and slide barn doors made from carbon steel. Carbon steel is a strong and durable metal that is often preferred for barn door hardware because of its ability to hold up against heavy weight and frequent use. The hardware includes a track that is mounted on the wall or ceiling, and hangers or rollers that attach to the door and slide along the track. Other components include stops, handles, and floor guides that help keep the door in place and facilitate smooth operation.

 

Steel barn door hardware refers to the set of hardware components that are used to install and operate a sliding barn door made of steel or other materials. It typically includes a track, rollers or hangers, stops, and a floor guide, all of which are made of high-quality steel for durability and reliability. Steel barn door hardware is a popular choice for homeowners and designers who want to add a rustic or industrial touch to their interior décor. It is known for its strength, durability, and smooth operation, and can be easily installed in any room of the house, including bedrooms, bathrooms, living rooms, and kitchens.

 

 
Benefits of Carbon Steel Barn Door Hardware
 
01/

Durability

Carbon steel is a strong and durable material that can withstand heavy loads and frequent use, making it ideal for barn door hardware.

02/

Cost-effective

Carbon steel is an affordable metal that offers good value for money, making it an attractive option for homeowners looking for reliable hardware without breaking the bank.

03/

Rust-resistant

Carbon steel is resistant to corrosion, which means it can withstand exposure to moisture and humidity without rusting, making it ideal for use in areas like bathrooms, laundry rooms, and kitchens.

04/

Easy to install

Carbon steel barn door hardware is easy to install, even for those with minimal DIY skills. Most kits come with all the necessary hardware, including screws, bolts, and brackets.

05/

Versatile

Carbon steel barn door hardware can be used in a range of applications, including sliding closet doors, room dividers, and pantry doors, making it a versatile option for any home.

06/

Stylish

Carbon steel has a sleek and modern look that can add a touch of sophistication to any room. With a range of finishes and styles to choose from, carbon steel barn door hardware can complement any décor style.

 

Satin Nickel Barn Door Kits

 

What Are the Applications of Carbon Steel Barn Door Hardware

Residential Use

Barn door hardware made of carbon steel is perfect for residential use. It can be used to create a stylish and functional barn door for a bedroom, living room, or pantry.

Commercial Use

Carbon steel barn door hardware is ideal for commercial use. It can be used in hotels, restaurants, offices, and other commercial spaces to create a stylish and functional space.

Industrial Use

Carbon steel barn door hardware is also used in industrial settings such as warehouses and factories. It is perfect for creating a sturdy and durable sliding door that can withstand heavy use.

Agricultural Use

Carbon steel barn door hardware is used in agricultural settings such as barns and stables. It is perfect for creating a sliding barn door that can be easily opened and closed.

Retail Use

 Carbon steel barn door hardware is also used in retail settings such as clothing stores and boutiques. It adds a rustic and stylish touch while also maximizing space.

 

Carbon Steel Barn Door Hardware Types

 

 

Satin Nickel Barn Door Kits

Satin Nickel Barn Door Kits are complete sets of hardware used to install a sliding barn door. They typically include a track, rollers, bolts, and hangers made of satin nickel finish material. Satin nickel is a popular choice for hardware finish because it combines the elegance and durability of nickel with a smooth, brushed, matte finish that complements a wide range of room styles. The barn door kit's components are engineered to support heavy doors and provide a smooth and quiet operation. The kits may vary in size and style, depending on the door opening size and the homeowner or contractor's preference.

Antique Rolling Door Hardware

Antique rolling door hardware refers to the hardware components used to install and operate rolling doors in antique or vintage styles. These hardware components typically include rollers, tracks, handles, locks, and brackets made from materials such as brass, bronze, iron, or steel. These components are designed to be durable, practical, and visually appealing, in keeping with the style and aesthetic of antique and vintage decor. Examples of antique rolling door hardware include barn door tracks and rollers, pocket door hardware, and sliding door handles. These types of hardware can be found at antique or vintage hardware stores, as well as online retailers specializing in antique and vintage decor.

Arrows Barn Door Hardware

Arrows Barn Door Hardware is a brand that specializes in designing and manufacturing high-quality barn door hardware kits. Their products are known for their easy installation, smooth operation, and durability. Arrows Barn Door Hardware offers a wide range of styles and finishes to choose from, ensuring that you can find the perfect match for your home decor. Some of their popular collections include the Classic, Modern, and Industrial series, each with their unique design elements and hardware options. Arrows Barn Door Hardware also offers accessories such as door handles, floor guides, and soft-close mechanisms to enhance your barn door's functionality and aesthetic appeal.

Wood Sliding Barn Door Hardware

Wood sliding barn door hardware is a popular choice for those looking to add a rustic or farmhouse style to their home. The hardware includes a track system that allows the door to slide open and closed, along with the necessary hangers and handles to secure the door in place.

 

Barn Door Hardware for Homes

 

Components of Carbon Steel Barn Door Hardware

Track: A metal bar mounted above the door opening. Your door will be hung from this.

Rollers: little wheels mounted on the track to allow the door to move smoothly. You'll need at least two for a single standard-sized door.

Hangers: Small metal plates that attach the door to the rollers.

Door guides: Tiny wall-like metal pieces mounted to the floor to prevent the door from swinging.

Stops: Barriers mounted at both ends of the rail on the floor to keep the door from sliding off the track.

Jump blocks: Round (sometimes square) pieces of plastic or metal mounted on top of the door to keep it from “jumping” off the track.

Standoffs (sometimes called spacers): Tube-like pieces mounted behind the door track to prevent the door from scraping against the wall.

Connectors: Metal plates used to connect tracks together for particularly long doors. Depending on the dimensions of your door, you may not need these.

Bypass brackets: L-shaped brackets that mount to the wall and hang over the inner track to hold a second track. These are only used for bypass double-door styles.

 

 

Carbon Steel Barn Door Hardware Features

Strong carrying capacity

Thanks to scientific structural design and the high strength provided by carbon steel, these sliding kits can withstand doors weighing 180 pounds to 250 pounds without deformation during long-term use.

 

Silent sliding

Steel rails and nylon-coated hangers make the door slide smoother and quieter. Moreover, these accessories have undergone special surface treatment to become more wear-resistant.

 

Modern style appearance

Satin nickel barn door kits also have a very nice exterior design, finished in satin nickel. So it looks smooth and generous, which can effectively improve the beauty of the door.

 

Multiple customization options

Track lengths include 6FT, 6.6FT, 8FT, 10FT, 13FT and other options, so customers can choose according to the actual size of the door. We also provide customized finishes, such as ORB, matte finishes.

Sliding Door Kits for Wooden Doors

 

Carbon Carbon Steel Barn Door Hardware in 4 Easy Steps

 

Step 1

Using a stud finder and a level, hang the mounting board on the wall studs. I used 3″wood screws to attach it and made sure I place a screw on every stud.The mounting board offers extra support (remember you'll be hanging a super heavy door on it) and makes the process easier. Having the board also allowed me to leave the existing door casing. A definite plus!

Step 2

Once the board is up, it's a good idea to paint it. Painting around the hardware, is a pain. Trust me :). I painted mine black to match the hardware. You could also paint it the same color as the wall, like I did in my son's room.Once the paint is dry, rest the metal rail above the mounting board and make pencil marks on the 1×4 that line up with the predrilled holes on the rail. Once all are marked, drill pilot holes in those places. Use a drill bit that is slightly smaller than the screws that come with the kit.

Step 3

Once the board is up on the wall you're ready to hang the metal rail. Get yourself a helper if you can. It's possible to do it solo, but can be frustrating. And since you'll likely be standing on a ladder you should be safe.Drill pilot holes in the center of the circles you drew, using a drill bit that slightly smaller than the nut screws that comes with the kit. Once the holes are drilled, place a spacer with the flat side facing the mounting board, follow with the metal rail, then the washer and screw. Tighten with the nut driver.

Step 4

Remember, it is critical that you hang this level. Otherwise, your door will slide unwanted. Give it a check as you install each spacer. There's a little wiggle room at first.can be intimidating. Follow the step by step instructions ahead to hang sliding door hardware onto wooden studs on regular drywall. You can do it!

 

Maintenance Tips for Carbon Steel Barn Door Hardware
 

Regular Cleaning 

Dust, dirt, and debris can accumulate on barn door hardware, causing it to wear down over time. Regular cleaning can help prevent this. To clean your barn door hardware, you’ll need a soft cloth, warm water, and mild soap. Start by wiping down the hardware with a dry cloth to remove any loose dust or dirt. Then, dip the cloth in the soapy water and wring out the excess. Wipe down the hardware with the damp cloth, being sure to get into all the crevices. Finally, rinse the hardware with a clean, damp cloth and dry it thoroughly.

 

Lubrication

Over time, barn door hardware can become stiff or difficult to move. Lubrication can help prevent this. There are several types of lubricants that can be used, including silicone spray, WD-40, and white lithium grease. To lubricate your barn door hardware, start by cleaning it as described above. Then, apply a small amount of lubricant to the rollers, hinges, or any other moving parts. Be careful not to apply too much, as this can attract dust and debris. Move the door back and forth a few times to distribute the lubricant evenly.

 

Inspection and Repair

Regular inspections can help catch any issues with your barn door hardware before they become major problems. During an inspection, look for signs of wear, damage, or rust. If you notice any issues, make the necessary repairs or replacements as soon as possible. For example, if you notice that the rollers are worn down, replace them before they cause damage to the rail.

 

 
Certificate

 

productcate-1-1

 

 
Our Factory

 

Hangzhou Spark Hardware was established in 2008, located in Hangzhou city of eastern China, closely near Shanghai. We specialize in designing, manufacturing, and exporting of high-quality sliding door hardware, door lever handle and shower accessories for over 15 years. Our company is a top 5 biggest producer of sliding barn door hardware in China. The sales figure last year reached more than $15 million.Today we are enjoying the position of a credible and successful supplier and business partner. We have the best R&D department in the sector of sliding door hardware and the number of our loyal customers is rising constantly.We are always committed to providing customers with the best quality products and services, and customer satisfaction is our ultimate goal.

productcate-1-1
productcate-1-1
productcate-1-1
productcate-1-1

 

 
FAQ

 

Q: What hardware is needed for barn doors?

A: The hardware necessary for installing a barn door comprises of seven main components: a track, rollers, hangers, door guides, jump blocks, standoffs, and stops. Each piece of hardware serves to ensure proper door functionality and guarantee safety.

Q: What is the difference between barn door and sliding door?

A: In residential and commercial settings, barn doors are used as a decorative element to add a touch of rustic charm to a space. The main difference between barn doors and other types of sliding doors is the design. Barn doors are typically made of wood and feature large panels that slide along a track.

Q: Why is it called a barn door?

A: Everything You Need To Know About Barn Doors | Rustica
Barn doors were originally designed to function for farmers who had large barns that needed a door that would allow for the cattle and livestock to enter and exit (or egress) without the need to swing the barn door open but rather slide it away from the path of the livestock.

Q: How much bigger should a barn door be than the opening?

A: 2 to 3 inches
Ideally, the door will cover 2 to 3 inches beyond the opening on each side. To figure out what size barn door track hardware you need, double your final width measurement. Measure from the header to the floor to determine the door length you need.

Q: Should barn doors be solid or hollow?

A: Your barn door can have a hollow or solid core. A barn door with a hollow core is lighter and cheaper. While not completely hollow, these are typically filled with a combination of synthetic materials and wood, making them less dense. Hollow core doors are great for closets or pantries.

Q: Can you use a standard door for a barn door?

A: Barn doors are typically taller and wider than a normal door in order to cover some of the door frame. In order to re-create this with your existing door you need to add some additional wood for width and height. First add 2x2s around all door edges and attach with wood glue and screws.

Q: What can I use instead of a barn door?

A: In an era where social distancing and room dividers are gaining in use, offices are turning to sliding glass doors as the perfect barn door alternative. Sliding glass doors allow for private separation without blocking precious views and daylighting.

Q: Are barn doors more expensive than normal doors?

A: While a sliding barn door might cost more than a swinging door initially, it might last longer, provide more benefits and use, or just give you a better quality door. In some cases, you may even choose a door that's cheaper than the traditional doors that you have been looking into.

Q: Why do people love barn doors?

A: Because they take up wall space when not in use, barn doors essentially function as focal points of the room. Think of them almost like a cross between a door and a piece of art. If you have a room without many architectural features, the barn door can fill that void.

Q: Why do people use barn doors?

A: In addition to being great space savers, barn doors are also incredibly functional. They can be made from lightweight materials so they are easy to open and close for both small children and busy adults who might have their hands full.Barn doors don't seal like traditional hinged doors do, that's why leave what's called “a barn door gap.” This can affect privacy and the ability of the door to seal off sounds, smells, and drafts.

Q: What is carbon steel barn door hardware?

A: Carbon steel barn door hardware is a type of hardware specifically designed for barn doors. It is made of carbon steel, which is a strong and durable material that is able to endure the weight of the door and withstand constant use.Bottom Track for Sliding Barn Doors: A Must-Have or a Nice-to ...Theoretically, siding barn doors don't need a bottom track. They can be installed without it. This primarily applies to interior sliding barn doors where the upper track does all the heavy lifting. However, just because a barn door can be installed without a bottom track doesn't mean it should.

Q: What are the advantages of using carbon steel barn door hardware?

A: Carbon steel barn door hardware offers many benefits, such as durability, strength, and longevity. It is also resistant to rust and corrosion, making it ideal for use in humid or damp environments. Additionally, it provides a sleek and modern look to any barn door.

Q: What types of carbon steel barn door hardware are available?

A: Carbon steel barn door hardware comes in a variety of styles and sizes. Some common types include sliding door hardware kits, track and roller sets, wall mounts, and bi-fold door hardware.

Q: How do I choose the right size of carbon steel barn door hardware for my door?

A: The size of the carbon steel barn door hardware you choose will depend on the size and weight of your barn door. You should measure the width and height of your door to determine the appropriate size of hardware.

Q: Is carbon steel barn door hardware easy to install?

A: Carbon steel barn door hardware is relatively easy to install. Most kits come with step-by-step instructions and all the necessary hardware for installation. However, if you are not comfortable installing it yourself, it’s best to hire a professional to do it for you.

Q: How do I maintain carbon steel barn door hardware?

A: To maintain carbon steel barn door hardware, you should wipe it down regularly with a damp cloth to prevent buildup of dust and debris. You may also want to lubricate moving parts with a silicone-based lubricant to ensure smooth operation. Finally, you should inspect the hardware periodically to ensure there is no damage or wear.

Q: Why are barn doors so popular?

A: Barn doors are often popular because they provide a cozy and rustic feel to a room. They can also be used as a way to divide a room into separate spaces. Barn doors can be custom made to fit any size or shape opening. They are also a popular choice for homes with a country or farmhouse theme.

Q: Is it difficult to install a barn door?

A: Not only is it easy, but we provide you with step-by-step instructions with your purchase on how to do it! It's important to make sure the doorway you are installing your barn door on has adequate structural support. The wall-mounted door hardware must be attached to a structural blocking or head casing.

Q: Can a barn door be too heavy?

A: 5 Things to Consider Before Installing a Barn Door in Your ...
The barn door hardware is placed on the exterior of the frame. However, it is very possible for the door you've selected to be too heavy for the area you want it installed. If this is going to be a DIY project, you will need to make sure that it isn't.

Q: Should barn doors touch the floor?

A: The barn door should be wide enough to completely cover the doorway with an inch or two of overhang on both sides and about one inch at the top. The door should be tall enough so that there is about a 1/2 inch of space between the bottom of the door and the floor when it's hung on the track.A barn door can be used at the entrance of your primary bedroom to add charm, without disrupting the character and décor of your bedroom. A bedroom barn door can be the highlight of your room or the perfect subtle element to pull the space together.

Find professional steel barn door hardware manufacturers and suppliers in China here. We're offering high quality customized products with competitive price, please rest assured to wholesale bulk steel barn door hardware for sale here from our factory.

Interior Barn Door Floor Guide, chrome wardrobe handles, black cupboard door handles

(0/10)

clearall