How To Deal With The Door Handle Falling Off

If the door handle falls off, it must be repaired in time, otherwise it will affect the normal use. So how do you deal with the door handle falling off?

1. Whether the inner door handle falls off, or the outer door handle falls off, what needs to be done is to remove the entire door lock and then install it.

2. Prepare the required tools and turn down the three screws on the side of the door. These three screws are used to fix the lock body and the handle fixing position respectively. After unscrewing, the door handle can be removed.

3. Next, find the two screws on the inside of the door and turn them down with a tool. At this time, you need to use your hand to hold the outer door handle to avoid damage. When disassembled, put it aside for storage.

4. Next is the installation of the door handle, first install the internal handle, screw the screw in the appropriate position, then it can be fixed, and then install the various parts.

5. After the installation is completed, it is necessary to check whether the entire handle can be used normally and flexibly. If not, it is necessary to check whether there is a place where the installation is not in place and adjust it in time.

Door handle installation and precautions for use

1. During the use of the door handle, the use of the door handle will be limited due to thermal expansion and contraction, especially in winter. Therefore, it is necessary to take necessary antifreeze measures to facilitate later use.

2. When installing the door handle, it is necessary to do a good job of cleaning. If you accidentally stain the lock body, you need to use a rag to clean it up. To prevent stains from getting deep into the handle or lock body.

3. The correct use of the door handle cannot be wrong. When opening or closing the door, it is necessary to ensure that the action is easy to avoid strong impact on the door body, resulting in damage to the wall.