How To Install The Sliding Door Track Most Securely

How to install the sliding door track most securely

The sliding door is now used by many families, and its convenience is naturally self-evident. However, the installation of sliding doors before use should be paid attention to. Only after installation, can it be more convenient to use and have better experience. The following editor will explain the installation method of the sliding door rail.

First, ensure the size of the track box on the upper part of the sliding door and its width. If the track is installed inside the track box, this can make the sliding door hang well on the track. And if its height is lower than 1.95 meters, it will bring a very tense and oppressive feeling. Its height must be higher than 1.95 meters. Of course, the average house can do it, the height is about the same, mainly depends on the width, after all, the different types, the door size is not universal.

The appropriate size should be determined according to the actual situation, and the sliding door and installation track will be selected after the actual measurement of the house.

In addition, when installing, be sure to use the sliding door from floor to ceiling carefully. Generally, when this door is pushed or pulled, its swing amplitude is relatively large. Once the time is too long, the quality of the door will be prominent, and the quality of some defective products will be prominent, and it may be deformed.

When installing the sliding door on the sliding door, the upper rail must be fully fixed, and the gravity cone must be used to suspend three points at the two ends and the midpoint of the upper rail. . After the upper track is installed, the hoisting hammer can be placed on the center point of the upper track to the ground. Vertical lines need to be placed at both ends of the track, and the lower track needs to be fixed at these three points. The tracks are parallel and the sliding door can be used after finishing.